Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C) Ingestion-build-141043 Side bend tests may be

Side bend tests may be carried out when the wall thickness is greater than 12 mm

Data Value constraints

certification and marking of steel wire rope slings for general lifting service

BS EN 15689 specifies the minimum requirements and acceptance tests for cast manganese crossing components

Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C) Ingestion-build-141043 Side bend tests may be1 Scope This British Standard species requirements for nickel chromium titanium manganese molybdenum silicon vanadium heat resisting steel supplied in the following forms, and as parts. a) Bars for machining: solution treated and precipitation treated, designation HR 51A. b) Billets and bars for forging: hot or cold worked and subsequently machined or ground, designation HR 51B. c) Forgings: solution treated and precipitation treated, designation HR