Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (5/8" OD, 3" CLR) NPS 1/4

Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (5/8" OD, 3" CLR) NPS 1/4Specs Outside Diameter of the Tubing (OD): 5 8" (15. 9 mm) Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3 (76. 2 mm) Maximum Degree of

Minimum Required Chuck-to-Table Height (for drill press use): 16" (407 mm)

Note: Requires 2 1/4-14 x 1 1/8" outside threads and 1-8 x 3/4" internal threads on the hydraulic cylinder

Centerline Radius: 4” (101

Outside Diameter of the Tubing (OD): 2-1/2" (63

Bend one full stroke of our 10-Ton rams in 9 seconds

Easy grip rectangular shape

Fixed positioning-no knocking it out of position

Requires ISO 68 weight hydraulic oil

Centerline Radius: 2-1/2" (50

see our full warranty policy

Built-in Degree Ring

Maximum Size: NPS 2 (DN 50)