90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 90 degrees

90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 90 degreesSpecs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7 (177. 8 mm) Maximum Degree of Bend:

Outside Diameter of the Tubing (OD): 2-1/2" (63

14 1/8" Stroke

Creates 180-degree bends in less than 2 minutes (requires appropriate die)

Fixed positioning-no knocking it out of position

If you are a serious hobbyist

Accurate to within a fraction of a degree

Includes all of the mounting brackets

Nominal Pipe Size (Diameter Nominal): NPS 3/4 (DN 20)

Outside Diameter of the Tubing (OD):1-5/8" (41

Minimum Inside Radius: Approximately 12” (305 mm)

1-1/2" x 2" Rectangular - Hardway

Offset Notching: None (See our Industrial Hole Saw Notcher for that capability