Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

FRM-1 NOTIFIER RELAY MODULEThe FRM 1 Addressable Relay Module provides the system with a dry contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows the dry contact to be activated, either manually or through panel programming, on a select basis. FRM 1(A) Relay Module: The FRM 1(A) Addressable Relay Module provides the system with a dry contact output for activating a variety of auxiliary devices, such

The current draw for the candela ratings will also vary from 18-143 mA based on the settings

the i3 detector plugs into its base with a simple Stop-Drop 'N Lock action

Direct-dial entry of address 01– 159 for FlashScan loops

The AOM-2RF is an addressable output relay control module

The Gamewell-FCI PID-95P addressable Point Identification Device is the interface between the non-powered

5 and 33 volts

which uses eye bolts to secure the cap via the inlet’s pin lugs

operating in airflow speeds of 100 to 4

It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC)

• Flexible armored stainless steel cable conduit with plastic end caps

LARGE COVER W/HOOK AND LOOP CLOSURE 31"X16 1/2"

The System Sensor 2WTA-B is a 2-wire