19 thread Standard Wire with eye terminal, ø7 mm, Length 17,8 m, Furlex 200S/E/TD

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

19 thread Standard Wire with eye terminal, ø7 mm, Length 17,8 m, Furlex 200S/E/TDThe original wire for Furlex 200S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000

Safe working Load: 540 kg

It is tied directly to rigging points

Bowsprit: G075 Alu

Length for stowage: 2530 mm

Height: 35

The BBB25 Single Becket Block is a 25mm high load ball bearing block designed for dynamic loads on smaller boats

spring loaded plunger is operated at the end fitting or with a release line

It features glass fibre reinforced sheaves with polymer bushings

This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard

Tighten the screw of the line guide hard

Type of head: Dome

All sections