Vibratechnics Mk1 Focus RS LH upper engine mount Bride

Vibratechnics Mk1 Focus RS LH upper engine mount BrideThis LHS mounting carries approximately half the weight of the powertrain and has to react forces in the three orthogonal planes as well as rotational. The standard mount does an acceptable job controlling engine movement and isolating the cabin from noise and vibration under 'normal' driving conditions. However when subjected to a tuned engine and or high performance driving conditions more control of engine movement is required. The fitting of

3 Noise (dB) 85

Pro Hose performance hose kit for the Corsa D VXR 1

with power upgrades available up to a 160 plus bhp it is a much more powerful and tuneable car than the older 1

Excessive toe-out will also result in premature tyre wear due to feathering

the higher the spring rate

Fan surround (original ford) fitted in Picture for illustration purposes only

Run 3 -Temperature Into intercooler from charger 149 degree & Out of Intercooler into engine 49 degree

Both cars tested with 8 degrees Ambient  Air temps

Finally an off the shelf way to fit a Race Tow Strap

MSRN102 - Centre Section - £20

Pipework Bore – 57mm

the system still has its limits and with sustained use on higher powered vehicles