Precursor Powder of NCMOH2 (Ni:Co:Mn = 9:0.5:0.5) for High Capacity NCM Cathode Powder, 200g/bottle - Lib-PNCM911 Li3PO4

Precursor Powder of NCMOH2 (Ni:Co:Mn = 9:0.5:0.5) for High Capacity NCM Cathode Powder, 200g/bottle - Lib-PNCM911 Li3PO4Lib PNCM911 is the precursor powder of NCMOH with Ni: Co: Mn = 9 : 0. 5: 0. 5 for High Capacity NCM Cathode Powder. There are 200 grams in one bottle Note: You must mix the precursor with LiOH. H2O and calcine the mixed powder at 750 790 C before use Specification Package 200g bottle in a vacuumed bag Composition NCMOH (Ni: Co: Mn = 9 : 0. 5: 0. 5) Configuration Sphere Particle Size Distribution D1011. 32 ? m D5013. 51 ? m D9016. 12 ? m Tap Density 2.

75Amps Syringe

Both sides polished (effective since Oct

Integrated Pressure Switch Allow Remote Confirmation and/or Monitoring of Output Pressure

19000 s/cm)

Size:                                         2" dia x 0

20 microns diamond particle for effectively cutting and slicing of ceramic and crystal

1mm thickness x 125 mm width x 200 mm Length

You may also click the related product to order the cutted small size board

Apply firm pressure to the tape with a rubber roll or a spatula

Polishing:                         both sides polished

Surface Roughness:   as grown

The Alumina cutting blade fits with MTI SYJ-150 low speed saw or other brand of low speed saw