1-1/2" PVC Push Point Compression Points it is simple removed from

it is simple removed from the PVC pipe by unscrewing it

This allows the hole to be opened from a shallow hole on the edge of the sidewalk and then travel deeper to clear the bottom of the curb and gutter and exit into the micro trench or pot hole in the road

As the shafts are extracted the tape or line is pulled into the hole which can then be attached to the microduct and installed

The rig itself attaches to the sidewalk and does not require that  stakes or anchoring devices be driven into the property owners soil next to the sidewalk

1-1/2" PVC Push Point Compression Points it is simple removed fromThis part is used to insert a 1 1 2" PVC Sch 40 pipe into the ground after the initial hole is opened with the compression point. It is threaded into the end of a 2 sch 40 PVC pipe or conduit. As it is screwed into the pipe it cuts its own threads on the inside of the pipe much like a tap. The outside diameter of the push point will be the same as the outside diameter of the pipe itself. Next this pipe point assembly is shoved into the same opening