Hochiki NS6-100 23/02

Hochiki NS6-100 23/02The NS6 base is an electronics free 6" base featuring a plastic tamper lock lug. Each base is equipped with a resistor. Models HSC 224R, HSC 220R and the HSC 221R are designed specifically for use with the Hochiki conventional models SLR 24H, SLR 24V, SLV 24, SLV 24N, SLV 24V, SLR 835, SLR 835H, DCD 135 190. The HSC (X)R series is a 6" base with two sets of Form "C" relay contacts. Models HSC 224R, HSC 220R and the HSC 221R are also approved for use

We are not accepting any walk-ins at this time

Expand your system's potential and maintain peace of mind with this essential upgrade

Detectors shall have a sensitivity in the range of 4 to 10 gallons per minute and a static pressure rating of 450 psi for 2˝–8˝ pipes

The input modules gather analog information from the initiating devices connected to them and convert it into digital signals

The Macurco OX-6 is a low voltage

and other chemical processing or other commercial applications

Cables have connector on one end only (split

Environmental class IV

fixed temperature heat detector that initiates an alarm when the ambient temperature exceeds +135°F

Ground fault detection by address

The alarm bell is powered by 24VDC

Externally mounted amplifi ers provide an additional 50 or 125 watts of addressable audio power when con nected to the ECC-50/100 Up to eight distributed amplifi ers can be connected to the ECC-50/100 for a total of 1100 watts of audio power Includes four built-in speaker circuits which are expand able to eight circuits with an optional ECC-CE4 module (A maximum of 24 audio circuits) Speaker output voltage is fi eld confi gurable on ECC-50DA for either 25 volts or 70