Rodkicker Type 30L, Min length 2700 mm - No Gas spring

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Rodkicker Type 30L, Min length 2700 mm - No Gas springRodkicker Type 30L is recommended for masthead rigged yachts with a displacement of max 25 tonnes and fractional rigged yachts up to 20 tonnes. 094 056 13 does not include a gas spring so the main purpose with this rigid vang is to facilitate sail handling when reefing, preventing the boom from dropping into the cockpit or onto the coach roof. It also doubles the purchase of your kicking strap. Kicking strap is not included. It can easily be upgraded

This Polyamide adaptor is used to fit a size ø48 spi pole end in a ø60 mm spinnaker pole section

Sealing compound is applied between the flanges of the washers

Length: 237

The BBB30 Tie-On Block is a 30mm ball bearing block that is tied on to a dinghy boom or to any other fixing point

This is a 22 mm wide and 3500 mm long standard track with holes for M5 fasteners

Designed for cam cleats used with 3-7 mm lines and compatible with M4 fasteners and c-c 27 mm hole spacing

42 mm x 2000 mm long pin stop track with holes for M10 fasteners

Suitable for Seldén mast sections size up to C245/F246

42 mm x 2000 mm long standard track with holes for M10 fasteners

Recommended for boats with a righting moment < 35 kNm at 30° heeling angle which corresponds to approximately 6 ton displacement

this cleat prevents rope burn under high-load conditions

Drive belt for Furlex 300E drive unit