Spare Tack assembly, furling mast Type RC, mast section 290/150 with boom sections 200/117 and 250/140

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Spare Tack assembly, furling mast Type RC, mast section 290/150 with boom sections 200/117 and 250/140The tack assembly of a furling mast is where you attach the tack of the sail. This part is by purpose the weakest part of the furling system because it is easy to replace if something goes wrong. One way to ruin a day on the water is to forget to release the outhaul while trying to furl the sail in with a winch or a powered line driver. This will twist and finally break the tack assembly. Check the sparepart list and select the right model for your

It can accommodate a low friction ring or 'Tie-On' block

the AT-cable can now be permanently tensioned and always ready for furling

Composite sheave used mainly for boom ends (B190)

Machined and black anodised sheet lead designed to lead lines over deck or to achieve correct angle to a winch

Base Diameter: Ø167 mm

A temporary tail-line is then fitted to the lower point and lead back to a winch for final tensioning

Min Rv: 4000

com/files/1426855963/595-153-E

The Cam Cleat 38 Mk2 with Aluminium Cams is designed for lines between 4-12 mm

Wire Diam: 6 mm

Max Halyard Ø: 14 mm

System: BBB60