Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

067-0405-02 Tektronix Fixture UsedAdditional Features: Compensate a passive probe Optimize the instrument gain and offset accuracy at the probe tip Compensate for timing differences between two, three, or four voltage probes (deskew) Compensate for timing differences between one, two, or three voltage probes and a current probe (deskew) The Tektronix 067 0405 02 fixture has two BNC inputs, A and B. Use the BNC cable to connect the instrument Probe Compensation output to either the A

ramp waveforms to 1 MHz

± 4% full scale (< 10 mV/div) Vertical (Analog) DC vertical offset accuracy ± 0

The new PQA823 shown here is offered as a distinct line item from the PQA824

The comparison table below lays out the axes side by side

500A Operating time >18 Hours when fully charged Battery Type 3

The datasheet's model-comparison table indicates that voltage spike and fast transient capture at 5 microsecond resolution is the feature that distinguishes the higher PQA824 model from this unit

2 GSa/sec each channel

The 80W output's documented voltage programming accuracy is 19 mV + 0

operated as an independent company until it was acquired by Danaher Corporation in 2007

at 55°C) Power sensitivity 0

and industrial control work

03% + 2 mA Readback Accuracy ± (%output + offset) Voltage 0

Exchange/Return Notes