Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

NLA NiteLight and Alert LEDThis accessory can be added to the ADOR products in order to shine a small amount of white LED light before and after the door shuts in the evening. The ADOR electronic board has a built in Auxiliary switch, where the connections are on pins 5 and 6 of the P1 connector plug. From the factory, the white plug as no terminals inserted in positions 5 and 6. Pin 5 is connected to the battery PLUS terminal. Pin 6 is switched to the battery NEGATIVE terminal

and without any fasteners along the sides

where the connections are on pins 5 and 6 of the P1 connector plug

and after testing equivalent to more than 35 years of daily open/close cycles

5" of total height when the door panel is open

but we get reports of short life sometimes

it may keep the door from opening or closing

This cable assembly has female disconnects on the motor end of the wires

Everything You Love About the ADOR1 — Bigger

If you have a house power receptacle "110V" or some people say "120VAC" receptacle at or in the coop

The sliding panel includes the upper and lower magnets that stop motion at the limits of travel

the battery will soon be dead

Material: Heavy-duty galvanized steel