Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Ballast Resistor (4 X 4R7)For use with low impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms. Includes set of 4 x 4. 7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 6. Note that injector ballast resistors get quite hot at high injector duty cycles. These should stay mounted on the supplied heat sink and be bolted to the

Overboost Shutdown

1 degree precision

then please PFR46-212

Ten Calibration Tables and 3 Linear Calibrations for when a custom calibration is required

All of the ports can accept a -8 ORB fitting in the inlet(s) and outlet allowing you to run either -6 or -8 AN fuel lines

Aux 13Â Â Â Â Â Â Â Â Auxiliary OutputÂ

240SX 89-94 S13 REINFORCED FRONT TPV STABILIZER BUSHING 2PCS 25mm

giving control and precision without compromising comfort

variable reluctance or optical

All Link G4X WireIn ECUâ€™s (Note: Loom B will also be required for the Storm/Fury/Xtreme)

Up to 2 fully variable closed loop VVT cams

PLATFORM SPECIFICS