Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Norski Mould Release WaxMould release wax is the answer for getting your products out of the mould, this is what the professionals use. Based on the same principle as waxing your vehicle, however, this product is applied with a clean cloth then wiped off with another clean cloth. This process needs to be repeated up to 5 times leaving an absolutely microscopically thin layer of wax on your mould which will enable you to get the trickiest of shapes out of your mould. Click

Once the resin has cured with the filler powder embedded in it

So not only is this the hardest filler known to man

300 GSM (Grams per square meter) is our most flexible matting and is widely stocked by our distributors as it will bend around curves and corners the easiest

so you need to have your mould all set up and ready to go with it’s release agents already applied

available here

his is our Epoxy Mortar product which is typically used as a concrete glue

but not necessarily

2 x 200ml cups and 2 x 30ml beakers

this is your 'go to' product

The same characteristics of curing times as our white filler

Gelcoat is effectively 'polyester paint for polyester fibreglass'

It covers correct measuring by volume

Exchange/Return Notes